Products
0102030405
YHZD-T35DFull-autoproductionlineforconicalsquarecan
Production Process
Stand and convey cans
→
Conical Expanding
→
Locating
→
Square Expanding
→
Panelling
→
Top flanging
→Bottom flanging
→Bottom seaming
→Turn over
→Top seaming
→Finished product
Product Introduction
YHZD-T30D full-auto production line for trapezoid square can. The speed can reach 30cpm. This line adopts conical expanding first, and then square expanding forming process, making the tinplate stretch evenly as well as the flanging, with grip flanging process. It avoids the flanging becoming arc and ensure the seaming quality. It uses purely mechanical cam transmission, cam conveying can, cam holding can, and makes the speed continuously adjustable. With protection device for can jam, it makes the production process run safely & smoothly.
Main Technical Parameters
| Output: | 35 CPM |
| Applicable range: | 18L、20L square cans |
| Applicable tinplate thickness: | 0.25-0.35mm |
| Applicable tinplate temper | T2.5-T3 |
| Weight: | APP. 20T |
| Applicable can height: | 200-420mm |
| Power of whole line: | APP.72KW |
| Voltage: | Three-phase four-line 380V (Can be configured according to different countries) |
| Air pressure: | Not lower than 0.6Mpa |
| Dimension (L×W×H): | 9100mm×2150mm×2850mm |