Products
0102030405
YHZD-35DFull-autoproductionlinefor18Lsquarecans
Production Process
Stand and convey cans
→
Locating
→
Expanding
→
Panelling
→
Bottom flanging
→
Bottom seaming
→Turn over
→Top flanging
→Top seaming
→Finished product
Product Introduction
YHZD-35D full-auto production line for 18L square can. The maximum speed can reach 35cpm. Using grip flanging and pneumatic sucking lid in seaming part, it's more applicable for lids. This line adopts purely mechanical cam transmission, cam conveying can, cam holding can, and makes the speed continuously adjustable. The whole line uses machines joint and flexible control system to perform higher synchronization. With protection device for can jam, it makes the production process run safely, smoothly & fast, and ensures the seaming quality in the meantime.
Main Technical Parameters
| Output: | 35 CPM |
| Applicable range: | 18L、20L square cans |
| Applicable tinplate thickness: | 0.25-0.35mm |
| Applicable tinplate temper: | T2.5-T3 |
| Weight: | APP. 20T |
| Applicable can height: | 200-420mm |
| Power of whole line: | APP.60KW |
| Voltage: | Three-phase four-line 380V (Can be configured according to different countries) |
| Air pressure: | Not lower than 0.6Mpa |
| Dimension (L×W×H): | 8400mm×2150mm×2850mm |