Hot Products
0102030405
Full-Auto Drum Production Line with Roll Beading – China Suppliers & Factory for Efficient Manufacturing
Production Process
Expanding
→
Top & Bottom Pre-Flanging
→
Top & Bottom Flanging
→
Roll Beading
→
Bottom Seaming
→
Turn Over
→
Top Seaming
Product Introduction
This line is developed according to customer's special requirements. The pail body is expanding, then two flanging and rolling beading. It can use for double and triple seam.
Main Technical Parameters
| Output | 30CPM | Power of Whole Line | APP. 52KW |
| Applicable Can Diameter | Φ220–300mm (need to change moulds) | Voltage | Three-phase four-line 380V (Can be configured according to different countries) |
| Applicable Can Height | 180–450mm | Air Pressure | Not lower than 0.4Mpa |
| Applicable Tinplate Thickness | 0.28–0.48mm | Weight | APP. 15.5T |
| Applicable Tinplate Temper | T2.5–T3 | Dimension (L×W×H) | 12500mm × 1950mm × 3100mm |
Frequently Asked Questions
Q
What is the output capacity of this pail production line?
The production line delivers an output of 30 cans per minute (30CPM), making it well-suited for medium-to-high volume manufacturing operations.
Q
What range of can diameters and heights does this line support?
The line supports can diameters from Φ220mm to Φ300mm (mould changes required) and can heights ranging from 180mm to 450mm, offering flexible production for various pail sizes.
Q
What types of seaming does this production line support?
This line is designed to support both double seam and triple seam applications, providing versatility for different packaging and sealing requirements.
Q
What are the power and voltage requirements for this line?
The whole line consumes approximately 52KW of power and operates on a three-phase four-line 380V electrical supply. The voltage configuration can be customized to meet the standards of different countries.
Q
What tinplate specifications are compatible with this equipment?
The line is compatible with tinplate thicknesses ranging from 0.28mm to 0.48mm and tinplate tempers from T2.5 to T3, covering the most commonly used materials in metal pail manufacturing.
Q
What are the overall dimensions and weight of the production line?
The complete production line measures approximately 12,500mm × 1,950mm × 3,100mm (L×W×H) and weighs approximately 15.5 tons, requiring adequate floor space and structural support for installation.