Hot Products
0102030405
Full-Auto Pail Production Line YTZD-T18CG - Leading China Suppliers and Factory Solutions
Production Process
Flanging by rollers & Bottom expanding
→
Bottom seaming
→
Turn over
→
Expanding
→
Pre-curling
→
Locating
→
Curling & Beading
Product Introduction
YTZD-T18CG pail line is a brand new developed production line in recent years for Chinese market. The whole line uses flexible control technology, making the line more stable, more smoothly.
Advantages
✅
Flanging by rollers and can be adjusted for double or triple seam and basically adapted in all tinplate.
✅
It also uses rollers for pre-curling & curling, which requires few for raw material, and reduces the defective percentage.
Main Technical Parameters
| Parameter | Value | Parameter | Value |
|---|---|---|---|
| Output | 30–35 CPM | Power of whole line | APP. 58 KW |
| Applicable can diameter | Φ260–300 mm (need to change moulds) | Voltage | Three-phase four-line 380V (Can be configured according to different countries) |
| Applicable can height | 250–480 mm | Air pressure | Not lower than 0.6 Mpa |
| Applicable tinplate thickness | 0.28–0.48 mm | Weight | APP. 14.5 T |
| Applicable tinplate temper | T2.5–T3 | Dimension (L×W×H) | 6050 mm × 1950 mm × 3100 mm |
Frequently Asked Questions
Q
What is the YTZD-T18CG pail line designed for?
The YTZD-T18CG pail line is a brand new production line developed specifically for the Chinese market. It uses flexible control technology to ensure stable and smooth operation throughout the entire manufacturing process.
Q
What is the output capacity of the YTZD-T18CG pail line?
The production line has an output capacity of 30–35 cans per minute (CPM), making it suitable for medium-to-high volume pail manufacturing operations.
Q
What range of can sizes is compatible with this production line?
The line supports can diameters from Φ260 mm to Φ300 mm (mould changes required) and can heights ranging from 250 mm to 480 mm, offering flexible adaptability to different pail specifications.
Q
What type of tinplate material does the YTZD-T18CG line support?
The production line is compatible with tinplate thicknesses from 0.28 mm to 0.48 mm and tempers ranging from T2.5 to T3, covering a wide range of standard tinplate materials used in pail manufacturing.
Q
What are the power and utility requirements for this line?
The whole line requires approximately 58 KW of power. It operates on a three-phase four-line 380V electrical supply (configurable for different countries) and requires an air pressure of no less than 0.6 Mpa.
Q
What are the key advantages of the roller-based flanging and curling system?
The roller-based system allows adjustment for double or triple seam configurations and is adaptable to virtually all types of tinplate. Using rollers for pre-curling and curling also reduces raw material requirements and significantly lowers the defective product rate, improving overall production efficiency.